IC Series - Submersible Dewatering Pumps
- The internal casting is treated with High solids Epoxy coating, which can improve the anti-corrosion and extend the product lifetime.
- Standard design, incorporating a dry motor with thermal Auto-cut Protector that prevents the motor from over heating. Equipped with a cast iron motor frame for a faster heat dissipation. As well as an abrasion resistant mechanical seal and an additional oil seal.
- Water cooled motor to ensure a long life in continuous and intermittent operation, with high efficiency and energy savings.
- An exceptional High-lift and suction impeller design, which allows for dewatering of underground or circulating water applications.
Features
- For above or below surface water applications; the IC pump strainer can be easily removed and replaced with a check valve, which allows for dewatering up to max. 8m deep of underground water and water circulation applications. (W–Well Type)
- New casing cover, with metric thread bolt hole that is easier for valve and adapter connection.
- The chrome steel impeller has been adopted for IC-32B~610, with hardness of HRC 25~30; better anti-corrosion, and extended product lifetime.
- High solids Epoxy coating prolong metals from corrosion and oxidization.
Applications
- Aquiculture water supply and drainage.
- Water supply for agricultural irrigation systems and underground water pumping.
- Landscape, water feature and horticulture irrigation.
- Extraction of water from rivers, lakes and reservoirs.
|
|
Description(50hz) | Description(60hz) | |
|---|---|---|---|
| Limits of Use | Liquid Temp. | 0~40°C (32~104°F) | 0~40°C (32~104°F) |
| Applications | Agriculture irrigation • Circulating water • Dewatering | Agriculture irrigation • Circulating water • Dewatering | |
| Type | Frequency | 50Hz | 60Hz |
| Motor | 2P (3000rpm) • Dry Motor | 2P (3600rpm) • Dry Motor | |
| Insulation | Class F (1.5~5HP) • Class H (7.5~10HP) | Class F (1.5~5HP) • Class H (7.5~10HP) | |
| Protection | IP68 | IP68 | |
| Protector | Auto-cut | Auto-cut | |
| Bearing | Ball type | Ball type | |
| M.seal | Double M.seals | Double M.seals | |
| Impeller | Close | Close | |
| Material | Outer Cover | SUS304 | SUS304 |
| Upper Cover | FC200 | FC200 | |
| Motor Frame | SUS304 (1.5HP) • FC200 (2~10HP) | SUS304 (1.5HP) • FC200 (2~10HP) | |
| Shaft | SUS403 (1.5~3HP) • SUS304 (5~10HP) | SUS403 (1.5~3HP) • SUS304 (5~10HP) | |
| M.seal | CA/CE & SiC/SiC | CA/CE & SiC/SiC | |
| Casing | FC200 | FC200 | |
| Impeller | BC (1.5HP) • Chrome Steel (2~10HP) | BC (1.5HP) • Chrome Steel (2~10HP) | |
| Cable | VCT or H07RN-F or SJOW/SOW | VCT or H07RN-F or SJOW/SOW | |
| Optional | Pumps can be customized to fit specifications | ||